ELSEMA 151MHz - 4 CH RECEIVER 12VDC - FMR15104

Brand: Elsema

Elsema Logo

ELSEMA 151MHz – 4 CH RECEIVER 12VDC – FMR15104

Brand: Elsema

Elsema Logo

Includes:

  • Genuine 4 channel 151mhZ receiver
  • Installation Instructions
  • Free Shipping Australia-Wide*
  • 2 Years Manufacturers Warranty*

$119.96

Availability:

In stock

Availability:

In stock

Includes:

  • Genuine 4 channel 151mhZ receiver
  • Installation Instructions
  • Free Shipping Australia-Wide*
  • 2 Years Manufacturers Warranty*

Features:

  • 4 Ch. Receiver with relay outputs
  • Supply voltage can be AC or DC
  • Low current consumption
  • Built-in noise or signal strength indicator
  • User can select 8 different frequencies
  • Momentary and Latching modes are all user selectable
  • Easy code setup with dip switch settings
  • Optional QM150 bracket available for easy mounting to cases or walls.
  • 2 Years Manufacturers Warranty*
  • Free Shipping Australia-Wide*

Includes:

  • Genuine FMR15104 151MHz receiver
  • Installation Instructions

The ELSEMA 151MHz – 4 CH RECEIVER 12VDC – FMR15104 gives you four relay outputs with a contact rating of 8 amps at 240VAC. The relay mode can be set to momentary or latching.

The user can select 8 different narrow band frequencies and program unlimited number of transmitters to the receiver. With a narrow band FM 151MHz signal from the transmitter a line of sight operating range of 5000 metres is possible. The receiver uses a crystal oscillator circuit that ensures high frequency stability allowing optimal performance in the receiving range.

Type

Brand

Elsema

151 Series

Receiver

Supply Voltage11.0 – 28.0 VDC

10.0 – 28.0 VAC

Can use Elsema AC power pack (PP12 / PP24) Supply lines should be less than 3m long to comply with radio frequency authorities

Current Consumption24mA Standby at 12VDC 100mA if both relay “ON” at 12VDC
Receiving Frequency151.6MHz (8 selectable frequencies. See table above)
Operating Temperature Range-5 to 50°C
SensitivityBetter than 0.5uV (For relay to activate)
Type of DemodulationNarrow-Bandwidth Frequency Modulation (FM)
OutputsFour change over relay outputs, each rated at 8 Amps/240 Volts
ConnectionSupply, Antenna & Outputs – Screw type terminal block
Antenna50Ω, 151MHz Antenna, Elsema ANT151M for maximum performance

A piece of approximately 1metre wire can be used for short range applications

Dimensions95 x 70 x 20mm
Mounting Hole Size3.97mm or 5/32”
Weight83g
Useable TransmittersAll FMT151 series (with correct setting on the dip switch). See Transmitter datasheet for details.
Useable operating rangeUp to 5000 metres, depending on installation and type of antenna used. Recommended Antenna is Elsema ANT151M

Programming Instructions

How to program the FMR15104 receiver

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features:

  • 4 Ch. Receiver with relay outputs
  • Supply voltage can be AC or DC
  • Low current consumption
  • Built-in noise or signal strength indicator
  • User can select 8 different frequencies
  • Momentary and Latching modes are all user selectable
  • Easy code setup with dip switch settings
  • Optional QM150 bracket available for easy mounting to cases or walls.
  • 2 Years Manufacturers Warranty*
  • Free Shipping Australia-Wide*

Includes:

  • Genuine FMR15104 151MHz receiver
  • Installation Instructions

The ELSEMA 151MHz – 4 CH RECEIVER 12VDC – FMR15104 gives you four relay outputs with a contact rating of 8 amps at 240VAC. The relay mode can be set to momentary or latching.

The user can select 8 different narrow band frequencies and program unlimited number of transmitters to the receiver. With a narrow band FM 151MHz signal from the transmitter a line of sight operating range of 5000 metres is possible. The receiver uses a crystal oscillator circuit that ensures high frequency stability allowing optimal performance in the receiving range.

Type

Brand

Elsema

151 Series

Receiver

Supply Voltage11.0 – 28.0 VDC

10.0 – 28.0 VAC

Can use Elsema AC power pack (PP12 / PP24) Supply lines should be less than 3m long to comply with radio frequency authorities

Current Consumption24mA Standby at 12VDC 100mA if both relay “ON” at 12VDC
Receiving Frequency151.6MHz (8 selectable frequencies. See table above)
Operating Temperature Range-5 to 50°C
SensitivityBetter than 0.5uV (For relay to activate)
Type of DemodulationNarrow-Bandwidth Frequency Modulation (FM)
OutputsFour change over relay outputs, each rated at 8 Amps/240 Volts
ConnectionSupply, Antenna & Outputs – Screw type terminal block
Antenna50Ω, 151MHz Antenna, Elsema ANT151M for maximum performance

A piece of approximately 1metre wire can be used for short range applications

Dimensions95 x 70 x 20mm
Mounting Hole Size3.97mm or 5/32”
Weight83g
Useable TransmittersAll FMT151 series (with correct setting on the dip switch). See Transmitter datasheet for details.
Useable operating rangeUp to 5000 metres, depending on installation and type of antenna used. Recommended Antenna is Elsema ANT151M

Programming Instructions

How to program the FMR15104 receiver

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.