ELSEMA 151MHz - 4 CH TRANSMIT 12VDC - FMT15104E

Brand: Elsema

Elsema Logo

ELSEMA 151MHz – 4 CH TRANSMIT 12VDC – FMT15104E

Brand: Elsema

Elsema Logo

THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURERS

The following FMT151 Range is still available:


ELSEMA FMT 151MHz HIGH POWERED TRANSMITTER FEATURES:

  • Genuine original equipment transmitter
  • Free standard delivery Australia-Wide*
  • 2 Year Manufacturer warranty*

Each replacement remote comes with:

  • Brand New Transmitter
  • Installation Instructions

Available with 1, 2, 4 and 8 channel inputs

Available with or without the alloy metal casing.

Features:

  • Built-in LED indicates transmission
  • User selectable up to 8 different frequencies
  • Compatible with all FMR151 series receivers
  • Easy to program and install with code switch technology
  • Available in durable alloy metal case (E after product number) or no case version
  • Selectable transmission modes – Off Delay, Continuous and One burst
  • Not affected by natural or man-made electrical interference.

This FMT151 series has a transmission power of 100mW and a current consumption of only 85mA. It gives a controlled range of up to 5000 metres. The controlled operation can be any electronic or electrical operated device when used with the FMR151series of receivers. The channels are activated via screw type terminals onto which the user can connect reed switches, toggle switches, push buttons or any form of normally open (NO) contact.

Brand

Elsema

MPN

Does Not Apply

UPC

Does not apply

Type

151 Series

Transmitter

Power Supply11 to 13.6 VDC (for constant RF-Output) , screw type terminalAbsolute maximum 14VDC
Current ConsumptionNominal 85mA at 12VDC supply (Transmitting) Nominal 12mA on standby (10uA on sleep mode, all inputs off)
Operating Frequency151.6MHz (8 selectable frequencies)
Operating Temperature Range0 – 50°C
Type of EmissionNarrow-band-width Frequency Modulation
R.F. Output Power100mW, into 50 ohms SO239 socket
Baud Rate40 to 4800bps
Digital Coding System On-board12-way Code Switch
AntennaSO239 socket is provided
Dimension90 X 56 X 15 mm(PCB Assembly)140 X 60 X 34 mm(Enclosed).
Mounting Hole Size4.00 mm or 5/32 ” (PCB Assembly)4.76 mm or 3/16″
Mounting Hole SpacingLength 76 mm (3.00″) Width 45 mm (1.77″) (PCB Assembly)Length 125 mm (4.92″) Width 45 mm (1.77″) (Enclosed).
Weight85 grams (PCB Assembly)225 grams (Enclosed).
Useable Operating RangeUp to 5000 meters, depending on installation and type of antenna used. Recommended Antenna is Elsema ANT151M

Programming Instructions for the FMT15104E

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURERS

The following FMT151 Range is still available:


ELSEMA FMT 151MHz HIGH POWERED TRANSMITTER FEATURES:

  • Genuine original equipment transmitter
  • Free standard delivery Australia-Wide*
  • 2 Year Manufacturer warranty*

Each replacement remote comes with:

  • Brand New Transmitter
  • Installation Instructions

Available with 1, 2, 4 and 8 channel inputs

Available with or without the alloy metal casing.

Features:

  • Built-in LED indicates transmission
  • User selectable up to 8 different frequencies
  • Compatible with all FMR151 series receivers
  • Easy to program and install with code switch technology
  • Available in durable alloy metal case (E after product number) or no case version
  • Selectable transmission modes – Off Delay, Continuous and One burst
  • Not affected by natural or man-made electrical interference.

This FMT151 series has a transmission power of 100mW and a current consumption of only 85mA. It gives a controlled range of up to 5000 metres. The controlled operation can be any electronic or electrical operated device when used with the FMR151series of receivers. The channels are activated via screw type terminals onto which the user can connect reed switches, toggle switches, push buttons or any form of normally open (NO) contact.

Brand

Elsema

MPN

Does Not Apply

UPC

Does not apply

Type

151 Series

Transmitter

Power Supply11 to 13.6 VDC (for constant RF-Output) , screw type terminalAbsolute maximum 14VDC
Current ConsumptionNominal 85mA at 12VDC supply (Transmitting) Nominal 12mA on standby (10uA on sleep mode, all inputs off)
Operating Frequency151.6MHz (8 selectable frequencies)
Operating Temperature Range0 – 50°C
Type of EmissionNarrow-band-width Frequency Modulation
R.F. Output Power100mW, into 50 ohms SO239 socket
Baud Rate40 to 4800bps
Digital Coding System On-board12-way Code Switch
AntennaSO239 socket is provided
Dimension90 X 56 X 15 mm(PCB Assembly)140 X 60 X 34 mm(Enclosed).
Mounting Hole Size4.00 mm or 5/32 ” (PCB Assembly)4.76 mm or 3/16″
Mounting Hole SpacingLength 76 mm (3.00″) Width 45 mm (1.77″) (PCB Assembly)Length 125 mm (4.92″) Width 45 mm (1.77″) (Enclosed).
Weight85 grams (PCB Assembly)225 grams (Enclosed).
Useable Operating RangeUp to 5000 meters, depending on installation and type of antenna used. Recommended Antenna is Elsema ANT151M

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.