The B&D Controll-A-Door Power Drive Motor for Rolling Doors includes:
- B&D 600N Motor
- Wall Mount Remote Control
- 2 x Tri-Tran+ Premium Remote Controls
- Installation Accessory Pack
- Installation Instructions
- Free Standard Shipping Australia-Wide*
- 7 Years Manufacturers Warranty*
The B&D Controll-A-Door Power Drive is one of B&D’s most popular rolling door opener.
Every Controll-A-Door® automatic garage door opener comes standard with 2 premium Tri-Tran+ remote controls and 1 wall control unit offering you advanced security, excellent operating
range and reliable operation with virtually no interference from other wireless devices such as door bells and baby monitors.
This system is Smart Phone Control Ready and is suited for single and double doors.
- Tri-Tran+TM Technology
- Code Hopping Technology
- Multi-Channel Transmitter
- Safety Reversing System
- Memory Retention
- Manual Release
- Self Locking
- Service Fault Indicator
- Safety Beam Failure Emergency Close
- Dynamic Door Profiling
- Courtesy Light
- Vacation Mode
- Auxiliary Output
- Pet (Pedestrian) Mode
Only transmitters with the Tri-Tran+TM Technology can operate with the latest Openers, reducing the chance of interference from other radio frequency sources. Tri-Tran+TM transmitters have the ability to code into earlier model openers.
Code Hopping Technology
Every time a transmitter is used a new security code is generated from over 100 billion possible code combinations. This greatly enhances the security of the system and makes “code grabbing” a thing of the past!
Multi-channel transmitters allow you to operate other devices such as an adjoining garage door or automated gate from the same handy unit.
Safety Reversing System
The automatic safety reverse system significantly reduces the risk of death or serious injury if trapped by a closing door. The safety reverse force can be adjusted for environmental conditions such as windy areas.
In case of a power failure the opener does not lose the transmitter codes or limit settings.
The manual release handle allows the door to be operated by hand in the event of a power failure.
There is no need to manually lock your garage door, as the opener ‘positively’ locks the door when closed.
Service Fault Indicator
Flashing LEDs on the control panel easily identify operational problems or service requirements.
Safety Beam Failure Emergency Close
When a safety beam prevents movement due to any reason other than a ‘real’ obstruction, the user can secure their property by pressing and holding a button on the remote control or OSC on the console.
Dynamic Door Profiling
Changing door characteristics are automatically compensated for and “learnt” with each operation of the door.
The courtesy light automatically switches on for approximately three (3) minutes when operating the door. This can also be programmed to turn on and off from a transmitter. (Refer to Section 8.2 for information).
A transmitter can be programmed to disable the garage door opener radio receiver. This is ideal if the door is to be left idle for prolonged periods. (Refer to 8.3 for information)
You can program a spare button on your remote control transmitter to operate this output to control items that can be switched using a momentary close. (Refer to 8.4 for information)
Pet (Pedestrian) Mode
A transmitter can be programmed to open the door partially to allow pets access to the garage. The default PET Mode height can be adjusted to a desired position. (Refer to 7.4 for information). To code a transmitter button to operate PET mode refer to 8.5 for information.
Only logged in customers who have purchased this product may leave a review.