Elsema iS1500 Sliding Gate Kit
Elsema iS1500 Sliding Gate Kit
Stock may need to be sourced from Australian suppliers to fulfil your order. Please allow additional time for dispatch. Contact us for ETA
Couldn't load pickup availability
Elsema iS1500 Industrial Sliding Gate Motor – 1200kg
The Elsema iS1500 Sliding Gate Motor Kit is a powerful industrial gate automation system designed for commercial and industrial sliding gates weighing up to 1,200kg on level ground.
Powered by a 250W 240V AC motor with a built in Omron Variable Speed Drive (VSD), the iS1500 delivers fast gate travel of up to 27 metres per minute (450mm/sec) while maintaining a smooth, controlled acceleration and deceleration.
Unlike standard residential sliding gate motors, the iS1500 has been designed for demanding applications where speed, durability and reliable access control are important.
Includes:
- iS1500 Sliding Gate Motor
- 3 x PentaFOB remotes
- 4 x 1m Nylon Rack
- 1 x Long Range Safety Beam
- Mounting Base
- Manual Release Key
- Installation Accessory Pack
Key Features:
- High-Speed Operator – faster than 20 metres per minute
- Easy Installation – powered by Elsema’s Eclipse® control card
- Soft Start & Soft Stop – ensures smooth operation and reduced wear
- Contactless Magnetic Limit Switches – enhance durability and accuracy
- Stop or Slow on Limit – for safe and controlled gate travel
- Designed in Australia – engineered for local conditions
Ideal Applications:
- Light Industrial Sliding Gates
- Light Commercial Access Points – reliable automation for warehouses, factories & complexes
- Large Residential Gates – fast and secure driveway automation
Technical Specifications:
| Gate Size | 1200kg |
| Travel Speed | 27m/min (450mm/sec) |
| Input Voltage | 240 Volts AC |
| Motor Voltage | 240 Volts AC |
| Limit Switch Type | 2 x Contactless Limit |
| Operating System | Eclipse Operating System (EOS) |
| Motor Size | 250W |
| Remote Storage Capability | Unlimited |
| Application | Light Industrial |
| Warranty | 12 Months Manufacturers Warranty |
Button/coin batteries can cause severe injuries or even death when swallowed. Keep batteries out of reach of children. If you suspect a child has swallowed or inserted a button/coin battery, seek medical attention immediately.
Downloads:
 Control Board |
Gate Motor
|
|
Frequently Asked Questions:
What is the iS1500 used for?
It is an industrial sliding gate motor kit with an Omron variable speed drive for heavy duty commercial gates.
What gate weight can it move?
It is rated for sliding gates up to 1200kg on level ground with a 250 Watt motor
How fast does the gate travel?
Typical travel speed is about 27m per minute, roughly 450mm per second.
What supply and motor voltage does it use?
The system runs on a 240 Volts AC with a 240 volts AC motor and built in Omron VSD control.
Does it have dual limit sensing?
Yes, it includes two contactless limit sensors with slow and stop logic for accurate positioning and smooth deceleration.
Is there any restrictions on gate length?
There is no limitation on gate length when designed with appropriate rack support and site layout.
This product contains a button or coin cell battery. To prevent possible SERIOUS INJURY or DEATH:
- Keep new and used batteries out of reach of children at all times.
- Do not use this product if the battery compartment is damaged or does not close securely.
- Dispose of used batteries immediately and safely — even flat batteries can cause serious harm.
- Do not ingest the battery. Chemical burn hazard.
- If you suspect a battery has been swallowed or inserted, act immediately — severe or fatal injuries can occur within 2 hours.