Features:

• 1 x Genuine Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Brand New Remote
• 1 x Battery
• 1 x Keyring Attachment
• Coding Instructions

Compatibility List:

• Napoleon White Button

Mainly sold in Australia by Napoleon Doors, this remote comes in a heavy chromed steel case & is very rugged, its 4 buttons line up make for ease of use & the whole remote fits nicely on a Key-Ring.

Programming Instructions for RollerDoor

• The operator should be under standby mode when coding transmitters.
• Open the semi-transparent cover and press K1 button, the coding light will be on and the operator is under transmitter learning mode.
• Press any button on the transmitter, the coding light will be off.
• Press the same button again the coding light will flash for 8 times then off.

The transmitter has been coded successfully.

Deleting Memory in RollerDoor

• Press the K1 button and hold on for over 8 seconds the coding light will be off, all storage will be cleared.
• Press the K1 button and release within 8 seconds. If the coding light flash and then off, it means the memory is full.
• The operator can learn 20 transmitters at most.

Programming Instructions for Sectional/Overhead and Tiltadoor

• Press ‘CODE’ button and hold on until the LED dot is on.
• Press any button (except the lock button) on the transmitter once, the dot will be off;
• Press the button again the dot will fast flash then LED displays ‘11’.
• After that the transmitter will be available.

Deleting Memory for Sectional/Overhead and Tiltadoor

Press ‘CODE’ button more than 8 seconds until the LED displays ‘C’, all the stored codes will be deleted.