MERLIN 2.0 EVO E138M Wall Button Remote

Brand: MERLIN

Merlin - Powering Garage Doors

MERLIN 2.0 EVO E138M Wall Button Remote

Brand: MERLIN

Merlin - Powering Garage Doors

Includes

  • Brand New Wall Switch
  • Coding Instructions
  • Free Shipping Australia-wide*
  • 2 Year Manufacturer Warranty*

Features:

  • Genuine original equipment remote
  • Free standard delivery Australia-wide*.
  • 2 Years Manufacturer Warranty*

Includes:

  • Brand New Wall Switch
  • Coding Instructions

The MERLIN 2.0 E138M remote is the next step in technology €“ using the same rolling code it is transmitted on three different frequencies simultaneously & compared inside the receiver to be accepted. Being part of the CHAMBERLAIN 2.0 series it is compatible with others in that series. Featuring 2 buttons & using AUX receivers you can control multiple devices like lights, pumps or security systems.


IS THIS THE RIGHT REPLACEMENT REMOTE FOR ME?

The MERLIN 2.0 EVO E138M Wall Button Remote is compatible with:

  • MT3850 EVO
  • MT60 EVO
  • MT100 EVO
  • MT120 EVO
  • MR650 EVO
  • MR850 EVO
  • WeatherMaster
  • TiltMaster
  • PowerAc

Wall Button Remotes:

Merlin 2.0 EVO E128M Wall Button Remote

The MERLIN 2.0 EVO E138M Wall Button Remote is NOT compatible with:

  • MERLIN CM128
  • MERLIN M128

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight.060 kg
Brand

MERLIN

MPN

+ 2.0 EVO E138M

UPC

Does not apply

Type

Colour of Buttons

White

Number of Buttons

Remote Colour

White

AS62368.1 Battery Compliant

Yes

Frequency433.30, 433.92 & 434.54 MHz
Code TypeRolling Code
Body TypeWall Switch
Number of Buttons3
Button ColourGrey
Case ColourGrey
Remote Size110 x 70 x 12mm
Range< 40 meters
Item Contains Lithium Coin/Button BatteryYes
Battery TypeCR2032
Access TypeTool Required
AS62368.1 CompliantYes

Programming Wall Button Remote

1. Press and release the “LEARN” button on the opener. The learn indicator light will glow steadily for 30 seconds

2. Within 30 seconds, press and hold the button on the remote that you wish to operate your garage door

3. Release the button when the opener light blinks. It has learned the code.

If the light bulb is not installed, two clicks will be heard.

Deleting the Memory

Press and hold the “LEARN” button on opener until the learn indicator light goes out (approximately 6 seconds).

All previous codes are now erased.

Features:

  • Genuine original equipment remote
  • Free standard delivery Australia-wide*.
  • 2 Years Manufacturer Warranty*

Includes:

  • Brand New Wall Switch
  • Coding Instructions

The MERLIN 2.0 E138M remote is the next step in technology €“ using the same rolling code it is transmitted on three different frequencies simultaneously & compared inside the receiver to be accepted. Being part of the CHAMBERLAIN 2.0 series it is compatible with others in that series. Featuring 2 buttons & using AUX receivers you can control multiple devices like lights, pumps or security systems.


IS THIS THE RIGHT REPLACEMENT REMOTE FOR ME?

The MERLIN 2.0 EVO E138M Wall Button Remote is compatible with:

  • MT3850 EVO
  • MT60 EVO
  • MT100 EVO
  • MT120 EVO
  • MR650 EVO
  • MR850 EVO
  • WeatherMaster
  • TiltMaster
  • PowerAc

Wall Button Remotes:

Merlin 2.0 EVO E128M Wall Button Remote

The MERLIN 2.0 EVO E138M Wall Button Remote is NOT compatible with:

  • MERLIN CM128
  • MERLIN M128

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight.060 kg
Brand

MERLIN

MPN

+ 2.0 EVO E138M

UPC

Does not apply

Type

Colour of Buttons

White

Number of Buttons

Remote Colour

White

AS62368.1 Battery Compliant

Yes

Frequency433.30, 433.92 & 434.54 MHz
Code TypeRolling Code
Body TypeWall Switch
Number of Buttons3
Button ColourGrey
Case ColourGrey
Remote Size110 x 70 x 12mm
Range< 40 meters
Item Contains Lithium Coin/Button BatteryYes
Battery TypeCR2032
Access TypeTool Required
AS62368.1 CompliantYes

Programming Wall Button Remote

1. Press and release the “LEARN” button on the opener. The learn indicator light will glow steadily for 30 seconds

2. Within 30 seconds, press and hold the button on the remote that you wish to operate your garage door

3. Release the button when the opener light blinks. It has learned the code.

If the light bulb is not installed, two clicks will be heard.

Deleting the Memory

Press and hold the “LEARN” button on opener until the learn indicator light goes out (approximately 6 seconds).

All previous codes are now erased.