DIGI-CODE 5070 Remote

Brand: DIGI-CODE

Digi Code Logo

DIGI-CODE 5070 Remote

Brand: DIGI-CODE

Digi Code Logo

This remote has been discontinued by the manufacturers.  Click on the product description for suitable replacement option.

THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURERS

Retro Remotes recommends the LEXO Multi-code 3060 aftermarket remote as its suitable replacement.

 


DIGI-CODE 5070 Remote

Features:

  • 1 x Genuine Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Brand New Remote
  • 1 x Battery
  • Coding Instructions

Compatibility List:

Made in the USA by DIGI-CODE.  Digi-Code copied the Multi-Code system & reversed the coding to be upside down.  Digi-Code 10 coding switches are DOWN for ON while Multi-Code are UP for ON.  

Just set both banks of switches to the correct sequence for remote to work.  The classic design has been around for some time now but has stood the test of time – he remote has a good positive feel & is just the right size for your key-ring.
Weight.040 kg
Brand

DIGI-CODE

MPN

Does Not Apply

UPC

Does not apply

Type

Colour of Buttons

Cream

Number of Buttons

Remote Colour

Grey

TECH SPECS FOR DIGI-CODE 5070 REMOTE

Frequency – 300MHz
Coding – Fixed Code
Body Type – Key-Ring
Buttons – 2
Button Colour – White
Case Colour – Grey
Size – 67 x 43 x 12mm
Range – > 40 meters

How to Program the BOSS/DIGI-CODE 5070 Remote

Note:  Both of these brands are electronically the same.  The only difference between the Multi-Code and Digi-Code is:

MULTI-CODE Switches = UP for ON
DIGI-CODE Switches = DOWN for ON

  1. Opening the working remote will reveal two x 10 switch banks (L/H Bank = L/H Button) on the circuit board.
  2. Duplicate this sequence exactly Multi-Code to Multi-Code or upside down Multi-Code to Digi-Code.

Trouble Shooting –

I do not have a working remote! 

If no working remote is available you will need to work from the receivers.  This will require you to remove the inspection panels to reveal the switch settings.  If you are unable to access these panels you will need to contact someone who can.  The receiver is most likely to be a Multi-Code Receiver and therefore you will be copying Multi-Code to Multi-Code.

Note:  Code the LEFT HAND button switch bank to the LEFT HAND Door looking in from the street.

PDF version of the DIGI-CODE 5070 REMOTE – CODING INSTRUCTIONS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURERS

Retro Remotes recommends the LEXO Multi-code 3060 aftermarket remote as its suitable replacement.

 


DIGI-CODE 5070 Remote

Features:

  • 1 x Genuine Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Brand New Remote
  • 1 x Battery
  • Coding Instructions

Compatibility List:

Made in the USA by DIGI-CODE.  Digi-Code copied the Multi-Code system & reversed the coding to be upside down.  Digi-Code 10 coding switches are DOWN for ON while Multi-Code are UP for ON.  

Just set both banks of switches to the correct sequence for remote to work.  The classic design has been around for some time now but has stood the test of time – he remote has a good positive feel & is just the right size for your key-ring.
Weight.040 kg
Brand

DIGI-CODE

MPN

Does Not Apply

UPC

Does not apply

Type

Colour of Buttons

Cream

Number of Buttons

Remote Colour

Grey

TECH SPECS FOR DIGI-CODE 5070 REMOTE

Frequency – 300MHz
Coding – Fixed Code
Body Type – Key-Ring
Buttons – 2
Button Colour – White
Case Colour – Grey
Size – 67 x 43 x 12mm
Range – > 40 meters

How to Program the BOSS/DIGI-CODE 5070 Remote

Note:  Both of these brands are electronically the same.  The only difference between the Multi-Code and Digi-Code is:

MULTI-CODE Switches = UP for ON
DIGI-CODE Switches = DOWN for ON

  1. Opening the working remote will reveal two x 10 switch banks (L/H Bank = L/H Button) on the circuit board.
  2. Duplicate this sequence exactly Multi-Code to Multi-Code or upside down Multi-Code to Digi-Code.

Trouble Shooting –

I do not have a working remote! 

If no working remote is available you will need to work from the receivers.  This will require you to remove the inspection panels to reveal the switch settings.  If you are unable to access these panels you will need to contact someone who can.  The receiver is most likely to be a Multi-Code Receiver and therefore you will be copying Multi-Code to Multi-Code.

Note:  Code the LEFT HAND button switch bank to the LEFT HAND Door looking in from the street.

PDF version of the DIGI-CODE 5070 REMOTE – CODING INSTRUCTIONS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.