Features:

• Genuine Elsema Remote
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Includes:

• 1 x Brand New Remote
• Keyring Attachment
• 1 x Battery
• Coding Instructions

Compatibility List:

This remote is compatible with the Elsema Penta receivers using the 12-way dip switch – just match the remotes and the receivers dipswitches.

No need for programmers, memory chips or computer databases to store the code.

Programming your remote

Elsema receivers are compatible with the Pentacode remotes using either the 12-Way Dipswitches or via the Advanced Rolling Code Technology.

12- Way Dip Switch Coding

• Set a random code on the receiver dip switch by flicking the dip switches “On” or “Off”.
• Open the battery cover in the Pentacode® remote.
• Match the 12-way dip switch to the receivers 12- way dip switch.
• Press button 1 on the remote and the receiver output should activate. This is indicated by the receiver LED.

To program the same Pentacode® remote buttons 2, 3 or 4 to another receiver change dip switch 11 and 12 in the 2nd, 3rd and 4th receivers.

Encrypted Coding

• All Dipswitches need to be set to OFF
• Press and hold the program button 1 on the receiver.
• Press the remote button you want to program for 2 seconds, receiver LED will flash Green
• Release the button on the receiver and the remote.
• The LED on the Pentacode® remote will flash to confirm the coding has been successful.

Deleting Memory

Short the CC pin on the receiver for 10 seconds. This will delete all the remotes from the receivers memory.