Elsema PentaFOB® 2 Button Remote – Secure, Durable, and Designed for Everyday Use

The Elsema PentaFOB® 2 Button Remote is the ultimate combination of advanced security, everyday durability, and convenient multi-device control. Proudly designed in Australia, this compact keyring remote is ideal for residential and commercial applications, offering unmatched protection against signal interference or cloning.

Its Frequency Hopping Spread Spectrum (FHSS) technology transmits encrypted codes over five simultaneous frequencies each time a button is pressed. This high-level encryption makes it virtually impossible to intercept or jam—ensuring your gates, doors, and automation systems remain secure.

Built for real-world use, the PentaFOB® remote features a reinforced nylon case designed to withstand daily wear and tear. Its practical design supports both keyring and lanyard attachment, allowing for easy access whether it’s clipped to your bag, keys, or work gear.

Please Note: This item is usually kept in stock; however, due to fluctuating order quantities, there may be occasions where stock needs to be replenished before dispatch. In these instances, orders will generally be shipped from our warehouse within 2–10 business days. For current stock availability and estimated dispatch times, please don’t hesitate to contact us.

Key Features:

• 2-button configuration – control up to two devices
• FHSS technology for top-tier signal security
• Durable reinforced nylon case – ideal for daily use
• Compatible with all Elsema PCR433 Penta receivers
• Stylish and compact keyring design

Whether you’re upgrading your home security or managing multiple entry points, the Elsema PentaFOB® 2 Button Remote delivers reliable performance, advanced protection, and long-term durability—all at a competitive price.

Need help with compatibility or setup? Contact our team for expert support.

Compatible with:

This remote is compatible with all Elsema Swing Gate Motors and Sliding Gate Motors as well as the below Elsema receivers.

Elsema PCR43301RE – 1 Channel Pre-Wired Receiver	Elsema PCR43302R – 2 Channel Wire-In Receiver	Elsema PCR43302P – 2 Channel Plug-In Receiver	Elsema PCR43302RE – 2 Channel Receiver in Enclosure
Elsema PCR43304R – 4 Channel Wire-In Receiver	Elsema PCR43304RE – 4 Channel Wire-In Receiver in Enclosure	Elsema PCR43305R – 5 Channel Wire-In Receiver	Elsema PCR43305RE – 5 Channel Wire-In Receiver in Enclosure
Elsema PCR43301240R – 1 Channel 240V Wire-In Receiver	Elsema PCR43301240RE – 1 Channel 240V Wire-In Receiver in Enclosure	Elsema PCR43302240R – 2 Channel 240V Wire-In Receiver	Elsema PCR43302240RE – 2 Channel 240V Wire-In Receiver in Enclosure

Frequently Asked Questions:

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

How to Program the Elsema PentaFOB® remotes

Remote to Receiver

1. Check that all switches are “OFF” on the receivers 12-way dip switch
2. Press and hold the program button on the receiver
3. Press the remote button for 2 seconds, receiver LED will flash and then turn Green
4. Release the button on the receiver and the remote
5. Press remote control button to test the receiver output

Remote to Remote (you will need to be near the receiver for this procedure)

If your receiver was manufactured prior to 2016

1. Open the case of a remote control that is already programmed and press and release the program button on the back of the board (The receiver enters learning mode)
2. Press the button of the remote in step 1 which activates the receiver
3. Press the button on the new remote which needs to be programmed for 2 seconds
4. Press the program button again of the remote in step 1(The receiver exits learning mode)
5. Press the new remote control button to test the receiver output

If your receiver was manufactured 2016 onwards

1. Open the case of a remote control that is already programmed and press and release the program button on the back of the board
2. Press the new remote control button for 2 seconds
3. Press the new remote control button again to test the receiver output

Video Programming