Features:

• 1 x Compatible Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Brand New Remote
• 1 x Battery
• 1 x Keyring Attachment
• Coding Instructions

Compatibility List:

• Napoleon Red Button Remote
• ET Doors Red Button Remote
• ACDC Red Button Remote
• Stratco Red Button Remote
• ET Doors TX4 Remote

NOTE:  This remote is not compatible with the Steel Line Motors

Programming into a Roller Door Opener

The operator should be under standby mode when coding transmitters.

• Open the semi-transparent cover and press K1 button, the coding light will be on and the operator is under transmitter learning mode.
• Press any button on the transmitter, the coding light will be off.
• Press the same button again the coding light will flash for 8 times then off.
• The transmitter has been coded successfully.

Deleting ALL remotes from a Roller Door Opener

These openers have a max. memory of 20 positions.

• Press the K1 button and hold on for over 8 seconds the coding light will be off, all storage will be cleared.

Programming remotes to a Sectional/Overhead and Tiltadoor Operator

• Press ‘CODE’ button and hold on until the LED dot is on. (Fig. A)
• Press any button (except the lock button) on the transmitter once, the dot will be off;
• Press the button again the dot will fast flash then LED displays ‘11’ (Fig. B).
• After that the transmitter will be available.

Deleting ALL remotes from a Sectional/Overhead and Tiltadoor Opener

• Press ‘CODE’ button more than 8 seconds until the LED displays ‘C’, all the stored codes will be deleted.