Features:

• 1 x Genuine Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Brand New Remote
• 1 x Battery
• Coding Instructions

Compatibility List:

This remotes is compatible with the Lexo RD1P1000A Rollerdoor Opener.

The Lexo RD1P1000A remote is a 4 button rolling code remote running on 433.92Mhz and over 4.29 billion Coding Combinations.

Code: Rolling Code

Frequency: 433.92Mhz

Written Instructions:

Coding Transmitter to Receiver

• Press and Hold on “CODE” button for 1 second until the LED dot is on.
• Press button on Transmitter once, the LED dot will go off. Press the same Transmitter button again.
• The LED dot will flash fast 8 times and then return to standby mode.
• The transmitter is now coded into the receiver.
• Repeat the above steps to code more transmitters.

The receiver has the capacity to store 20 transmitters. If the led display flashes “F” and returns to standby mode (after you have pressed the CODE button) this indicates that the memory storage is full (20 transmitters).

Delete Transmitters

•  Press and Hold on “CODE” button for more than 8 seconds until the LED flashes “C” all the stored codes are deleted. Only the matched switch on the transmitter is available.
• Once deleted test your previously working remotes to confirm all deleted then follow instructions to code transmitter to receiver.

Note: If failed to match the transmitter within 20 seconds, it will return to standby mode automatically.

Video Instructions:

Coming Soon