MERLIN 2.0 EVO E960M Remote

Brand: MERLIN

MERLIN 2.0 EVO E960M Remote

Brand: MERLIN

Includes:

Brand New Remote
1 x Battery
Coding Instructions
Keyring Attachment
Free Shipping Australia-wide*
2 Year Manufacturer Warranty*

$59.95

Availability:

In stock

Includes:

Brand New Remote
1 x Battery
Coding Instructions
Keyring Attachment
Free Shipping Australia-wide*
2 Year Manufacturer Warranty*

Features:

Genuine Merlin remote
Ability to code both Security+ and Security+ 2.0 on the one remote.
Unique code generated with each activation
Control up to four powered garage doors
Long range frequency
LED green light flashes when button is pressed
Superior design & durability
Free Shipping
2 Years Manufacturers Warranty

Includes:

Brand New Genuine Merlin Remote
CR2032 Lithium Battery
Keyring Attachment
Coding Instructions

Compatible with the following Genuine Merlin Openers:

Commander Essential (MS65MYQ),
Commander Elite (MS105MYQ),
Commander Extreme (MS125MYQ),
SilentDrive™ Essential (MR655MYQ),
SilentDrive™ Elite (MR855MYQ),
Commander Ultimate (MJ3800MYQ),
Commander MyQ,
WhisperDrive,
TiltMaster,
PowerAce,
CyclonePro,
OverDrive,
SilentDrive Elite MyQ,
SilentDrive BBU,
SilentDrive Pro,
QuietDrive Pro,
WeatherDrive,
MJ3800BBU,
MT800,
MT600,
MT1000,
MT3850,
MT5580P,
MT60P,
MT60,
MT230,
RollerAce (MR60),
MR600,
MR800,
MR1000,
MJ3800,
MJ3800R
and all other Merlin Security+ and Security+ 2.0 garage door openers

Genuine Merlin Receivers:

E8003M Tri-Channel Receiver
E860M Weatherproof Receiver
CM8002ANZ

Genuine Merlin Remotes:

Genuine Merlin Wall Button Remotes

The remote is preset for use with Merlin Security+ 2.0 systems

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight	.055 kg
Brand	MERLIN
MPN	+ 2.0 EVO E960M
Type	Remote
Colour of Buttons	Black
Number of Buttons	4
Remote Colour	Black
AS62368.1 Battery Compliant	Yes

Frequency	433.30, 433.92 & 434.54 MHz
Code Type	Rolling Code
Body Type	Key Ring
Number of Buttons	4
Button Colour	Black
Case Colour	Black and Chrome
Remote Size	74x32x12mm
Range	< 40 meters

Item Contains Lithium Coin/Button Battery	No
Battery Type	CR2032
Access Type	Tool Required
AS62368.1 Compliant	Yes

Programming Instructions

The Merlin Premium+ Remote can be used with both Merlin Security+ and Security+ 2.0 codes (dual function).4 buttons are available and any button can be programmed with either code.

Initially: Locate the LEARN button on your particular opener and identify the button on the remote you wish to use. Do not select a button already in use.

Merlin 2.0+ Series

The remote is preset for use with Merlin Security+ 2.0 systems, so for EVO door opener models with this code, simply program in the usual manner. Refer to the WIRELESS PROGRAMMING section in your Opener Operating Manual.

NOTE: If you are unsure what code has been set previously, use the Security+ programming sequence on page 2.

1. Press & hold the button on the remote you wish to use.
2. Press & release the LEARN button on the opener.
3. Release the remote button when the opener light flashes. The code has been learnt and the next press of the remote button should activate the door.

Merlin+ Series

To do this you will need to enter the unique REMOTE PROGRAMMING sequence:

Enter the programming MODE on the remote by pressing and holding the left and right buttons simultaneously for around 5 seconds. Release when the remote LED stays ON continuously.
Press & release the LEARN button on your garage door opener briefly. Within 30 seconds, the remote can now be programmed.
Select the button on the remote you wish to program and press once.

If the opener light flashes, the code has been learnt and step 4 can be performed. If not, press the selected button again until the opener light flashes, indicating the code has been learnt. At this point, do not press this button any more.

4. Now press any one of the OTHER 3 buttons of the remote (fig 4). This LOCKS IN the code to the button selected in step 3 and the remote LED turns OFF.

The next press of the button should activate the door, if not repeat the process.

NOTE: In the event you need to return a button to Security+ 2.0 code, repeat the programming sequence outlined above.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features:

Genuine Merlin remote
Ability to code both Security+ and Security+ 2.0 on the one remote.
Unique code generated with each activation
Control up to four powered garage doors
Long range frequency
LED green light flashes when button is pressed
Superior design & durability
Free Shipping
2 Years Manufacturers Warranty

Includes:

Brand New Genuine Merlin Remote
CR2032 Lithium Battery
Keyring Attachment
Coding Instructions

Compatible with the following Genuine Merlin Openers:

Commander Essential (MS65MYQ),
Commander Elite (MS105MYQ),
Commander Extreme (MS125MYQ),
SilentDrive™ Essential (MR655MYQ),
SilentDrive™ Elite (MR855MYQ),
Commander Ultimate (MJ3800MYQ),
Commander MyQ,
WhisperDrive,
TiltMaster,
PowerAce,
CyclonePro,
OverDrive,
SilentDrive Elite MyQ,
SilentDrive BBU,
SilentDrive Pro,
QuietDrive Pro,
WeatherDrive,
MJ3800BBU,
MT800,
MT600,
MT1000,
MT3850,
MT5580P,
MT60P,
MT60,
MT230,
RollerAce (MR60),
MR600,
MR800,
MR1000,
MJ3800,
MJ3800R
and all other Merlin Security+ and Security+ 2.0 garage door openers

Genuine Merlin Receivers:

E8003M Tri-Channel Receiver
E860M Weatherproof Receiver
CM8002ANZ

Genuine Merlin Remotes:

Genuine Merlin Wall Button Remotes

The remote is preset for use with Merlin Security+ 2.0 systems

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Weight	.055 kg
Brand	MERLIN
MPN	+ 2.0 EVO E960M
Type	Remote
Colour of Buttons	Black
Number of Buttons	4
Remote Colour	Black
AS62368.1 Battery Compliant	Yes

Frequency	433.30, 433.92 & 434.54 MHz
Code Type	Rolling Code
Body Type	Key Ring
Number of Buttons	4
Button Colour	Black
Case Colour	Black and Chrome
Remote Size	74x32x12mm
Range	< 40 meters

Item Contains Lithium Coin/Button Battery	No
Battery Type	CR2032
Access Type	Tool Required
AS62368.1 Compliant	Yes

Programming Instructions

The Merlin Premium+ Remote can be used with both Merlin Security+ and Security+ 2.0 codes (dual function).4 buttons are available and any button can be programmed with either code.

Initially: Locate the LEARN button on your particular opener and identify the button on the remote you wish to use. Do not select a button already in use.

Merlin 2.0+ Series

NOTE: If you are unsure what code has been set previously, use the Security+ programming sequence on page 2.

Merlin+ Series

To do this you will need to enter the unique REMOTE PROGRAMMING sequence:

Enter the programming MODE on the remote by pressing and holding the left and right buttons simultaneously for around 5 seconds. Release when the remote LED stays ON continuously.
Press & release the LEARN button on your garage door opener briefly. Within 30 seconds, the remote can now be programmed.
Select the button on the remote you wish to program and press once.

4. Now press any one of the OTHER 3 buttons of the remote (fig 4). This LOCKS IN the code to the button selected in step 3 and the remote LED turns OFF.

The next press of the button should activate the door, if not repeat the process.

NOTE: In the event you need to return a button to Security+ 2.0 code, repeat the programming sequence outlined above.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

MERLIN 2.0 EVO E960M Remote

MERLIN 2.0 EVO E960M Remote

Includes:

Includes:

Features:

Includes:

Compatible with the following Genuine Merlin Openers:

Programming Instructions

Merlin 2.0+ Series

Merlin+ Series

Reviews

Features:

Includes:

Compatible with the following Genuine Merlin Openers:

Programming Instructions

Merlin 2.0+ Series

Merlin+ Series

Reviews

Store

Pages

Customer Info

Open Hours

Phone Hours

Christmas Trading Hours