NEW VERSION AVAILABLE NOW – CLICK HERE TO BE REDIRECTED TO TRINITY REMOTE

Features:

• 1 x After Market Compatible Remote
• 2 Year Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1x After Market Code Ezy Azure Remote
• Battery
• Coding Instructions
• Key-Ring Attachment

Compatibility List:

This aftermarket remote is compatible with the following remotes:

• BOSS HT4 2211L1 Button
• BOSS HT4 2211L 2 Button
• BOSS HT4 2211L 4 Button
• BOSS HT3 BLUE LED
• CENTURION 2211L
• GUARDIAN 2211L
• GUARDIAN HT3 BLUE LED
• LYNX 2211L
• MODERN 2211L 1 Button
• MODERN 2211L 2 Button
• STEEL-LINE 2211L 1 Button
• STEEL-LINE 2211L 2 Button
• STEEL-LINE 2211L 4 BUTTON
• STEEL-LINE HT3 BLUE LED

Compatible with the following Garage Door Openers

• BRD1
• BRD2
• BRD3
• BRD4
• BRD9
• RD1
• RD2
• RD3
• RD4
• RD9
• BOL4
• BOL5
• BOL6
• BOL9
• OL4
• OL5
• OL6

Note: While Code Ezy Remotes bear the label RCM e2042 on the back, it should be noted that this label does not determine their compatibility. 

Written Instructions:

Roller Door Openers:

• Remove face plate by inserting a screwdriver into the slot located on the bottom side of face plate.
• Radio Set button is located under large Aqua Open/Close button
• With power turned on, press and release the small button (yellow LED will light up)
• Press the button on the New remote you wish to activate the opener.
• After CODING press and release the small button (learning button) and the yellow LED will show reset complete.

Overhead Panel Lift/ Tilt Operator 

• To the left of the four adjustment buttons is a recessed button marked “RADIO SET”
• With a pointed object push this button
• Press the button on the New remote you wish to activate the opener.

Deleting Remotes from Opener

Roller Door Opener

• Turn power off then press & HOLD down the “Radio Set” button while you turn the power on. The 3 LED’s will flash twice indicating that all codes have been deleted.

Overhead Panel Lift/Tilt Opener

• Hold the radio set button in for 5 seconds The courtesy light will then flash 7 times indicating all transmitters have been cleared from the memory.

Video Instructions: