Features:

• 1 x LEXO PE Beams
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Brand New Wired PE BEAMS
• Install Instructions

Note:  Wire not included

Lexo Powertech Wired PE Beams were initially created for use in the Lexo Powertech PL500E sliding gate motor but they are ideal for any site requiring a wired safety beam installation.  PE Beams allow for your household or business to have enhanced security.  PE beams allow your opener to safely access Smart Phone technology without causing damage to objects or people.

Safety beams are a requirement in Australia for any opener currently using Smart Phone Technology such as WIFI access.

Suitable for

• Sliding Gates
• Swing Gates
• Garage Doors
• Overhead Doors, Conveyors or Door Entrance
• Boom Gates, Alarm System or Warehouse Monitoring

• 12-24V AC/DC Input Voltage
• Maximum Sensing Range: 15m
• Waterproof IP44 Enclosure
• Output Method:  Relay Output
• Contact Current: Transmitter: 30mA max; Receiver: 25mA max
• Response Time: <100mS
• Emitting Element: Infrared LED/ Wave length: 940nm
• Operation Indicator: Transmitter: Red LED on; Receiver; Red LED On (beam broken) Off (beam aligned)
• Dimensions: 63x63x30mm
• Current Consumption:  Beam aligned: RX <25ma\TX <30ma; Beam Broken: RX <10ma\TX <30ma
• Connection Method: Terminal Block
• Housing Material: ABS/PC
• Safety Standard: CE

Installation Instructions:

1. Open the Cover and connect wires
2. Mounted the receiver and transmitter
3. Ensure there are no obstacles between the receiver and the transmitter
4. Power Up the photocells and make sure the LED light on the receiver and transmitter are ON.

For optimal efficiency, the receiver and transmitter should be properly aligned.

Wiring Instructions included with purchase.