Dual Leaf Gate
A dual leaf gate can be controlled with the addition of a second drive unit. Mains
power is only required for the control box and a 5-core low voltage cable for the
To activate the gate simply press a button on the TrioCode® transmitter,
keypad or other optional control devices. During an open or close cycle, the
gate can be stopped by pressing the button whilst it is in motion. The next
actuation will move the gate in the opposite direction.
The DCB-05 gate controller features a LCD display operator console which
simplifi es installation, adjustments and status indication. Features include editing
transmitter storage and names, setting para
TrioCode™ Code Hopping Technology
Every time a TrioCode™ transmitter is used, a new security code is randomly generated
from over 4.29 billion possibilities. This greatly enhances the security of the system and
makes “code grabbing” a thing of the past.
These transmitters also overcome interference issues by simultaneously sending a signal over
three different frequencies. Even if two of the three signals are jammed, the system will still work.
Security Code Store
The Elite® Swing Gate Opener uses revolutionary technology to securely store up to fi ve hundred and
eleven (511) transmitters in its memory with the ability to assign an 11 character name to each.
The display console on the DCB-05 gate controller “holds your hand” through the installation and setup
process. Also, during installation a handheld transmitter can be used to set gate travel limits, allowing the
installer to closely monitor the gate’s position and stop points instead of having to be within arms reach of
Gate Sync Delay
If the gate leafs overlap, a delay can be used to start one leaf moving without interfering with the other.
ISS (Intelligent Safety System)
Should the gate hit an obstacle or be restricted in some manner, it will automatically reverse. The
amount of force the gate should encounter before reversing is automatically adjusted by the
control system during the initialisation of the automatic opener. The gate will also stop if
restricted whilst opening. The Safety Obstruction Force should be checked at least once a
month. See installation manual for instructions.
The LCD console display screen indicates through text the status of the Elite®
Swing Gate Opener. When the MAIN SCREEN is displayed, the current position
of the gate or the result of the last movement can be viewed. The display also
shows the countdown timer for Auto-Close operations. Any active input will also
be displayed along with the state of various features such as periodic service,
battery backup operation and vacation mode.
Control of Lock and Lights
The incorporated controller has dedicated outputs for operating an electric
lock, warning or courtesy lights. The timing of these outputs can be adjusted
to suit your needs. In addition, a button on a remote transmitter can be
coded to operate the light output
Extensive Operating Modes Via Control Inputs
The DCB-05 gate controller can be confi gured to operate in many
different ways via the seven (7) control and safety inputs which include
P.E, AUXILIARY OPEN, STOP, CLOSE, OSC, SWIPE and PEDESTRIAN.
Operating Modes Via Remote Controls
Operation is provided with each transmitter’s button being able to be confi gured
to operate one of OSC, PEDESTRIAN, SWIPE, CLOSE, OPEN, STOP, LIGHT or
The functionality of the transmitter is further enhanced by four (4) Auto-Close modes, three
(3) PE Beam response modes and two (2) pedestrian response modes.
SmartSolar™ and Battery Backup Compatibility (optional)
The Elite® swing gate opener can be fi tted with a SmartSolar™ or Battery Backup kit for operation in the event of
a power outage, or where mains power access is not available.
The gate can be programmed to open partially to allow pedestrian access. In a dual leaf gate, only one leaf
opens to allow pedestrians through without permitting vehicle access.
The opener can be disengaged and the gate operated manually by opening the drive unit cover and
disengaging the gearbox. If power to the opener is disrupted for any reason, it can be disengaged. This will
allow you to manually open or close the gate.