Merlin/GRIFCO LR DRIVE

Merlin/GRIFCO LR DRIVE

Grifco LogoMerlin - Powering Garage Doors

Includes:

  • 1 x Merlin/Grico LR Drive operator
  • Battery backup
  • E138 Wireless Wall Control
  • 2 x 4 channel keyring transmitter
  • Installation Accessory Pack
  • Installation Instructions
  • 2 Years Manufacturers Warranty*
  • Free Shipping Australia-Wide*

$699.95

or 4 fortnightly payments of $174.99 with Afterpay More info

Availability:

In stock

Availability:

In stock

Bulk Discounts

Buy 5 or more items5%
Buy 10 or more items10%
Buy 15 or more items15%
Buy 50 +20%

Includes:

  • 1 x Merlin/Grico LR Drive operator
  • Battery backup
  • E138 Wireless Wall Control
  • 2 x 4 channel keyring transmitter
  • Installation Accessory Pack
  • Installation Instructions
  • 2 Years Manufacturers Warranty*
  • Free Shipping Australia-Wide*

Previously known as MR955 commercial

Features:

  • Genuine Merlin/GRIFCO Roller Door Motor Kit
  • Merlin myQ Technology compatibility
  • Minimum SideRoom Clearance
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Merlin/Grico LR Drive operator
  • Battery backup
  • E138 Wireless Wall Control
  • 2 x 4 channel keyring transmitter
  • Installation Accessory Pack
  • Installation Instructions
Lasting Performance

Designed for the heaviest of roller doors. Its cast aluminium sungear rotates on bearings and the powerful motor and gearbox combine for durability and strength.

Safe and Compliant

Compliant with both commercial and residential relevant standards. Grifco performs thorough testing to ensure our products are  safe and compliant.

Reliable Operation

Supplied with a separate 24VDC BBU

unit that can attach to the rear of the operator or wall mount. The unit provides uninterrupted operation of the door in the absence of power.

Internet Connectivity

myQ connectivity allows users to monitor and

control their door from anywhere in the world.

myQ connectivity requires the myQ Gateway and Grifco monitored safety beams (not included).

Safe Operation

Door operator buttons are angled at 45° to prevent fingers from sliding in between the  operator and the rolled up door curtain.

Easy Commisioning

Removing the front panel reveals the programming buttons and an easy- to-use terminal staging area. Wiring is easily directed up through a 20mm conduit entry in the staging area.

Convenient Maintenance

The most commonly serviced parts of LR-Drive, namely the PCB and encoder, can be serviced whilst the operator is installed, thanks to the

removable lower front panel.

Onboard BBU

Supplied with a battery backup unit. The BBU unit can be mounted directly to the rear of the operator, or wall / ceiling mounted if side room doesn’t allow.

Minimal Sideroom clearance

Maintains a super-slim 45mm thickness in between the door drum and the wall bracket. The BBU is designed to mount to the rear of the operator, however can be easily removed and wall or ceiling mounted via the 1m of extension cable.

Weight16. kg

Power Specifications
Main AC Power Supply 220-240 Vac 50Hz
Max. Pull Force 1,300N
Power 150W
Operating Temperature -20°C to +50°C
Door Specifications
Max Door Height 5.5m
Max Door Weight 270kg
Max Lift under Spring Tension 20kg
Normal Torque 45Nm
Maximum Door Area Commercial Steel Spring-Balanced Roller Doors up to 28m2
Max. Door Cycles 50 cycles / day
Dimensions
Operator Height 470mm
Operator Width 280mm
Operator Depth 95mm, 150mm with BBU (Door Curtain to Wall)
Compliance AS/NZS 60335-1
AS/NZS 60335-2-103

Transmitter Specifications
Hand Transmitters 64 devices
Keypad Transmitters 2 devices
Operator Frequency 433.30 / 433.92 / 434.54 MHz
Transmitter Management Compatible with STAR1000EVO (accessory sold separately)
Usage Indoor Use Only

Door Requirements

The maximum allowable height is 5.5m (light commercial door) with a maximum curtain area of 28m2 (door height in metres multiplied by the width in metres). The door must be of corrugated sheet construction, spring balanced & of a mass not exceeding 270 kg. Door axle diameter must not exceed 35 mm.

A 240V General Purpose Outlet (GPO) ie. Power Point must be available in close proximity to the operator. This fitting is not part of the operator hardware and must be supplied by the consumer.

Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door drum is on the edge of the curtain or is a smaller
diameter, additional clearance may be required.  (Ensure there is a power point near the operator.)

 

Coding Instructions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Previously known as MR955 commercial

Features:

  • Genuine Merlin/GRIFCO Roller Door Motor Kit
  • Merlin myQ Technology compatibility
  • Minimum SideRoom Clearance
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x Merlin/Grico LR Drive operator
  • Battery backup
  • E138 Wireless Wall Control
  • 2 x 4 channel keyring transmitter
  • Installation Accessory Pack
  • Installation Instructions
Lasting Performance

Designed for the heaviest of roller doors. Its cast aluminium sungear rotates on bearings and the powerful motor and gearbox combine for durability and strength.

Safe and Compliant

Compliant with both commercial and residential relevant standards. Grifco performs thorough testing to ensure our products are  safe and compliant.

Reliable Operation

Supplied with a separate 24VDC BBU

unit that can attach to the rear of the operator or wall mount. The unit provides uninterrupted operation of the door in the absence of power.

Internet Connectivity

myQ connectivity allows users to monitor and

control their door from anywhere in the world.

myQ connectivity requires the myQ Gateway and Grifco monitored safety beams (not included).

Safe Operation

Door operator buttons are angled at 45° to prevent fingers from sliding in between the  operator and the rolled up door curtain.

Easy Commisioning

Removing the front panel reveals the programming buttons and an easy- to-use terminal staging area. Wiring is easily directed up through a 20mm conduit entry in the staging area.

Convenient Maintenance

The most commonly serviced parts of LR-Drive, namely the PCB and encoder, can be serviced whilst the operator is installed, thanks to the

removable lower front panel.

Onboard BBU

Supplied with a battery backup unit. The BBU unit can be mounted directly to the rear of the operator, or wall / ceiling mounted if side room doesn’t allow.

Minimal Sideroom clearance

Maintains a super-slim 45mm thickness in between the door drum and the wall bracket. The BBU is designed to mount to the rear of the operator, however can be easily removed and wall or ceiling mounted via the 1m of extension cable.

Weight16. kg

Power Specifications
Main AC Power Supply 220-240 Vac 50Hz
Max. Pull Force 1,300N
Power 150W
Operating Temperature -20°C to +50°C
Door Specifications
Max Door Height 5.5m
Max Door Weight 270kg
Max Lift under Spring Tension 20kg
Normal Torque 45Nm
Maximum Door Area Commercial Steel Spring-Balanced Roller Doors up to 28m2
Max. Door Cycles 50 cycles / day
Dimensions
Operator Height 470mm
Operator Width 280mm
Operator Depth 95mm, 150mm with BBU (Door Curtain to Wall)
Compliance AS/NZS 60335-1
AS/NZS 60335-2-103

Transmitter Specifications
Hand Transmitters 64 devices
Keypad Transmitters 2 devices
Operator Frequency 433.30 / 433.92 / 434.54 MHz
Transmitter Management Compatible with STAR1000EVO (accessory sold separately)
Usage Indoor Use Only

Door Requirements

The maximum allowable height is 5.5m (light commercial door) with a maximum curtain area of 28m2 (door height in metres multiplied by the width in metres). The door must be of corrugated sheet construction, spring balanced & of a mass not exceeding 270 kg. Door axle diameter must not exceed 35 mm.

A 240V General Purpose Outlet (GPO) ie. Power Point must be available in close proximity to the operator. This fitting is not part of the operator hardware and must be supplied by the consumer.

Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door drum is on the edge of the curtain or is a smaller
diameter, additional clearance may be required.  (Ensure there is a power point near the operator.)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.