Features:

• Aftermarket Code Ezy Multi 2 Ch Receiver
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Includes:

• 1 x Brand New Receiver
• Installation Instructions

Compatibility List:

The Code Ezy Multi 2 Ch Receiver is compatible with most modern garage and gate remotes using fixed or rolling code and frequencies between 280 to 900MHz.  This receiver also works on some remotes using tri code technology.

• ATA PTX5 = 3 ON
• B&D Tri-Tran = 3 ON
• MERLIN+ = 3-7 ON
• BFT Mitto = 5 ON
• NICE Smilo = 5 ON
• SEIP 433 = 5 ON
• MHOUSE = 5 ON
• ATA PTX4 = 5 ON
• HERCULIFT = 5 ON
• AVANTI = 5 ON
• CENTURION = 5 ON
• SUPERLIFT = 5 ON
• GLIDEROL TM305C = 4 ON
• FAAC 433 = 6-8 ON
• FAAC 868 = 4-5-6-7 ON
• MARANTEC 433 = & ON
• MARANTEC 868 = 7-8 ON
• NICE ERA Inti 2 = 8 ON
• NICE FLOR-S = 1,2 & 4 ON
• UNIVERSAL 390 = 5-6-7 ON
• UNIVERSAL 300 = 5-8 ON
• UNIVERSAL 310 = 5-7 ON
• UNIVERSAL 318 = 5-6 ON
• UNIVERSAL 330 = 5,6,8 ON
• UNIVERSAL 433 = 6 ON

TECH SPECS FOR CODE EZY CLASSIC 2 REMOTE

Frequency – 433.92MHz
Coding – Rolling Code
Body Type – Key-Ring
Buttons – 4
Button Colour – Black
Colour – Red & Black
Remote Size – 50x30x12mm
Range – >40 Meters

Written Instructions

IMPORTANT NOTE – Select 12v or 24v AC or DC via the jumper pins located next to the POWER terminals. Prongs 1 & 2 = 12v – Prongs 2 & 3 = 24v

Set the 8 DIP Switches

• ATA PTX5 = 3 ON
• B&D TRI-TRAN = 3
• ON MERLIN+ = 3-7 ON
• BFT MITTO = 5 ON
• NICE SMILO = 5 ON
• SEIP 433 = 5 ON
• MHOUSE = 5 ON
• ATA PTX4 = 5 ON
• HERCULIFT = 5 ON
• AVANTI – CENTURION – SUPERLIFT = 5 ON
• GLIDEROL TM305C = 4 ON
• FAAC 433 = 6-8 ON
• FAAC 868 = 4-5-6-7 ON
• MARANTEC 433 = 7 ON
• MARANTEC 868 = 7-8 ON
• NICE ERA INTI 2 – FLOR-S 1, 2 & 4 = 8 ON
• UNIVERSAL 390 = 5-6-7 ON
• UNIVERSAL 300 = 5-8 ON
• UNIVERSAL 310 = 5-7 ON
• UNIVERSAL 318 = 5-6 ON
• UNIVERSAL 330 = 5-6-8 ON
• UNIVERSAL 433 = 6 ON

How to program remotes

• First select the brand name & set 8 x DIP switches to suit
• Press Ch1 or Ch2 learn button Press button on remote until LED flashes 4 times 3-4 Seconds)
• Repeat 2 for additional remotes

How to Erase All Remotes

• Press either learn button – LED flashes
• Hold until LED turns off – all remotes are erased

To make a 3-Wire System

Active – Negative – Switch Wire. Install a Link wire from Negative to Ch1 COM – Switch wire goes to CH1 NO – Power wires as normal.