Features:
- Genuine original equipment remote
- Free standard delivery Australia-Wide*
- 2 Year Manufacturer warranty*
Include:
- Brand New Remote
- 1 x Battery
- Coding Instructions
Compatibility List:
Warning: BFT remotes use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. Pressing a button on the remote sends the control unit a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
Note: The hidden button for the newer versions (non egg shape) is activated by pressing the top two buttons at the same time (LED light to the top).
Programming to the Deimos or Ares BTA Motors via the receiver with non-digital screen
- You will need to take the top cover off your motor and find the S1 button on the control board.
- Press S1 button once, Radio LED will flash
- On the New remote press hidden buttons (1 and 2) until the Radio LED goes solid
- On the New Remote press the button you wish to activate your opener, Radio LED will flash
Your remote should now be programmed to the opener.
Programming to the Deimos Ultra and other uLink Control Boards with LCD Screen
- Click bottom button (OK) on Control Board twice fast (hAlt will show on the LCD Screen)
- Click bottom button (OK) on Control Board twice at any speed (PArAn will show on the LCD Screen)
- Click bottom button (-) on Control Board twice at any speed (RADio will show on the LCD Screen)
- Click bottom button (OK) on Control Board twice at any speed (HiddEn will show on the LCD Screen)
- On the New remote press hidden buttons (1 and 2) until the red LED light on remote goes red and the LCD Screen shows Release)
- On the New Remote press the button you wish to activate your opener, continue this step for each remote you wish to program
- Click top and middle button (+ and -) at same time twice to enter Learning Mode.
Programming using an Existing Coded Remote
To complete this programming you will require to be within 3 metres of your opener and have a working remote.
- On the Working remote, press the hidden button either found on the back (accessed with a pin or paperclip) or Buttons 1 and 2 on new style remotes until the LED on the remote lights up.
- On the Working remote, press the button that currently opens the device.
- On New Remote, press the hidden button (1 and 2) together until Remote LED lights up.
Your remote should now be programmed.
Programming to the ECOSOL
If you are using the BFT EcoSol you will be required to program your remotes directly to the ECOSOL rather than the control board on the Motor. The ECOSol places the Motors Control board into a sleep mode that needs to be woken up by the remote.
- Make sure JP 14 Jumper Lead it in position on the control board of ECO SOL (LED 2 light will light up)
- Press the Radio LEARN button once on the control board of ECO SOL
- On the New remote press hidden buttons (1 and 2) until the Radio LED goes solid
- On the New Remote press the button you wish to activate your opener, continue this step for each remote you wish to program
- Remove the JP 14 Jumper Lead from this position and place in a safe place
PLEASE NOTE – Some equipment supplied by selected stockiest may be totally electronically programmed. The receiver will only pair with transmitters that have been coded with this device. If you cannot code the remotes, then they must be programmed by a BFT supplier using a special computer-based programming tool
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.