Frequency – 304MHz Coding – Billion Code Body Type – Key-Ring Buttons – 4 Button Colour – Black Case Colour – Black & Yellow Remote Size – 50x30x12mm Range – >40 Meters
Written Instructions:
Roller Door Openers:
Remove face plate by inserting a screwdriver into the slot located on the bottom side of face plate.
Radio Set button is located under large Aqua Open/Close button
With power turned on, press and release the small button (yellow LED will light up)
Press the button on the New remote you wish to activate the opener.
After CODING press and release the small button (learning button) and the yellow LED will show reset complete.
Overhead Panel Lift/ Tilt Operator
To the left of the four adjustment buttons is a recessed button marked “RADIO SET”
With a pointed object push this button
Press the button on the New remote you wish to activate the opener.
Deleting Remotes from Opener
Roller Door Opener
Turn power off then press & HOLD down the “Radio Set” button while you turn the power on. The 3 LED’s will flash twice indicating that all codes have been deleted.
Overhead Panel Lift/Tilt Opener
Hold the radio set button in for 5 seconds The courtesy light will then flash 7 times indicating all transmitters have been cleared from the memory.
Video Instructions:
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Code Ezy Azure Remote
Features:
1 x After Market Compatible Remote
2 Year Manufacturers Warranty*
Free Standard Shipping Australia-Wide*
Includes:
1x After Market Code Ezy Azure Remote (see compatible list below)
Battery
Coding Instructions
Key-Ring Attachment
Compatibility List:
This aftermarket remote is compatible with the following remotes:
Frequency – 304MHz Coding – Billion Code Body Type – Key-Ring Buttons – 4 Button Colour – Black Case Colour – Black & Yellow Remote Size – 50x30x12mm Range – >40 Meters
Written Instructions:
Roller Door Openers:
Remove face plate by inserting a screwdriver into the slot located on the bottom side of face plate.
Radio Set button is located under large Aqua Open/Close button
With power turned on, press and release the small button (yellow LED will light up)
Press the button on the New remote you wish to activate the opener.
After CODING press and release the small button (learning button) and the yellow LED will show reset complete.
Overhead Panel Lift/ Tilt Operator
To the left of the four adjustment buttons is a recessed button marked “RADIO SET”
With a pointed object push this button
Press the button on the New remote you wish to activate the opener.
Deleting Remotes from Opener
Roller Door Opener
Turn power off then press & HOLD down the “Radio Set” button while you turn the power on. The 3 LED’s will flash twice indicating that all codes have been deleted.
Overhead Panel Lift/Tilt Opener
Hold the radio set button in for 5 seconds The courtesy light will then flash 7 times indicating all transmitters have been cleared from the memory.
Video Instructions:
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.