Code Ezy Majestic Remote - ATA PTX4

Brand: CODE EZY

Code Ezy

Code Ezy Majestic Remote – ATA PTX4

Brand: CODE EZY

Code Ezy

Includes:

  • 1 x After Market Code Ezy Majestic Remote
  • 1 x Battery
  • Coding Instructions
  • Key Ring Attachment
  • Free Shipping Australia-Wide*
  • 2 years manufacturers Warranty*

Note:  This listing is for an Aftermarket Compatible Remote.    

$29.95

Availability:

In stock

Availability:

In stock

Includes:

  • 1 x After Market Code Ezy Majestic Remote
  • 1 x Battery
  • Coding Instructions
  • Key Ring Attachment
  • Free Shipping Australia-Wide*
  • 2 years manufacturers Warranty*
Note:  This listing is for an Aftermarket Compatible Remote.    

Features:

  • 1 x After Market Compatible Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x After Market Code Ezy Majestic Remote
  • 1 x Battery
  • Coding Instructions
  • Key Ring Attachment

Compatibility List:

  • ATA PTX4
  • ATA TX5
  • ATA TX5 Red Button
  • DURATRONIC 1 Button
  • DURATRONIC 2 Button
  • DURATRONIC 3 Button
  • DURATRONIC 4 Button

Note: While Code Ezy Remotes bear the label RCM e2042 on the back, it should be noted that this label does not determine their compatibility. 

Weight.025 kg
UPC

Does not apply

MPN

Does Not Apply

Compatible Brand

ATA

Brand

CODE EZY

Type

Colour of Buttons

Black

Number of Buttons

Remote Colour

Blue

AS62368.1 Battery Compliant

Not Applicable

Frequency433.92MHz
Code TypeRolling Code
Body TypeKey Ring
Number of Buttons4
Button ColourBlack
Case ColourBlack and Blue
Remote Size50x 30x 12mm
Range< 40 meters

 

Item Contains Lithium Coin/Button BatteryNo
Battery Type23A
Access TypeTool Required
AS62368.1 CompliantN/A

Written Instructions:

Pairing to your opener

  • Press and Hold the blue DOOR CODE button on the opener or SW1/SW2 on the receiver board.
  • Whilst still holding the above button, press the button you wish to control your device for 2 seconds.
  • Release the remote and pause for 2 seconds
  • Press the same button on the remote for another 2 seconds
  • Release the DOOR CODE or SW1/SW2 button

Test by pressing the button on the remote.

How to Delete all Stored Transmitters from Opener

  • Turn the opener off at the main switch
  • Press and Hold the DOOR CODE/ SW1 button
  • Whilst holding down the button turn the opener back on at the main switch
  • Release the button

Confirm by pressing a previously working remote – there should be no response.

Video Instructions:

Coming Soon

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Features:

  • 1 x After Market Compatible Remote
  • 2 Years Manufacturers Warranty*
  • Free Standard Shipping Australia-Wide*

Includes:

  • 1 x After Market Code Ezy Majestic Remote
  • 1 x Battery
  • Coding Instructions
  • Key Ring Attachment

Compatibility List:

  • ATA PTX4
  • ATA TX5
  • ATA TX5 Red Button
  • DURATRONIC 1 Button
  • DURATRONIC 2 Button
  • DURATRONIC 3 Button
  • DURATRONIC 4 Button

Note: While Code Ezy Remotes bear the label RCM e2042 on the back, it should be noted that this label does not determine their compatibility. 

Weight.025 kg
UPC

Does not apply

MPN

Does Not Apply

Compatible Brand

ATA

Brand

CODE EZY

Type

Colour of Buttons

Black

Number of Buttons

Remote Colour

Blue

AS62368.1 Battery Compliant

Not Applicable

Frequency433.92MHz
Code TypeRolling Code
Body TypeKey Ring
Number of Buttons4
Button ColourBlack
Case ColourBlack and Blue
Remote Size50x 30x 12mm
Range< 40 meters

 

Item Contains Lithium Coin/Button BatteryNo
Battery Type23A
Access TypeTool Required
AS62368.1 CompliantN/A

Written Instructions:

Pairing to your opener

  • Press and Hold the blue DOOR CODE button on the opener or SW1/SW2 on the receiver board.
  • Whilst still holding the above button, press the button you wish to control your device for 2 seconds.
  • Release the remote and pause for 2 seconds
  • Press the same button on the remote for another 2 seconds
  • Release the DOOR CODE or SW1/SW2 button

Test by pressing the button on the remote.

How to Delete all Stored Transmitters from Opener

  • Turn the opener off at the main switch
  • Press and Hold the DOOR CODE/ SW1 button
  • Whilst holding down the button turn the opener back on at the main switch
  • Release the button

Confirm by pressing a previously working remote – there should be no response.

Video Instructions:

Coming Soon

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.