Features:

• 1 x Stoddart Genuine Remote
• 2 Years Manufacturers Warranty*
• Free Standard Shipping Australia-Wide*

Includes:

• 1 x Stoddart Garage Remote
• 1 x Battery
• Coding Instructions
• Key Ring Attachment

Compatibility List:

This remote is compatible with a wide variety of similar motors including Centurion and Avanti TX4, Style and New Style remotes.

Openers:

• T5/500
• T6/600
• T8/800
• T-950
• T-1100
• Slimfit
• N3588
• SDO10
• SDO-21 TP/BP
• RDO10
• T12/S12
• T12/MPS
• MPS 21
• DPS D12/D20
• SDO-3 DC
• SDO-4
• SDO-P
• SDO-1
• SDO-21 DPS
• SDO-21 MPS

Frequency: 433 MHz

Battery: CR2016

Coding Type: Rolling Code

Buttons: 4

Written Instructions

How to Program the Stoddart Garage Door remote

1. Press the red learn button once.

2. Once you see BU on the display, press and hold a button on your handset until the light on the motor flashes rapidly and goes out, then release the button on the handset.

3. Now test that the handset works by pressing the same button on the handset.

4. If the handset didn’t code or you need to code in more handsets, repeat steps 1 to 3.

How to program two Stoddart Motors to a remote

If you have two Stoddart garage doors you can code one handset into both motors using two different buttons. 

1. Delete ALL existing hand sets on BOTH motors before coding in any handsets. Use procedure “Deleting Handsets from a Motor” below on both motors with all handsets.

2. To dual code handsets press the red learn button once, then BU should appear on the display

3. Once you see BU on the display, press the blue – button so RU appears on the display.

4. Once you have RU on the display press and hold a button on the handset until the light on the motor flashes rapidly and then goes out.

5. Repeat steps 1 to 2 on the other motor. Once you have RU on the display press and hold a different button on the handset.

6. Repeat all of the above steps until all handsets are coded.

How to Delete Memory in a Stoddart Opener.

When handsets have been lost or stolen and you need to ensure that your garage door is not accessible by this remote.

1. Press the red learn button once so BU appears on the display.

2. Then press and hold the green confirm button until the motor light flashes rapidly and goes out.

3. All handsets should now be deleted and the motor is now ready to receive new handsets.

Video Instructions

How to Program the Stoddart Garage Door remote

How to program two Stoddart Motors to a remote

How to Delete Memory in a Stoddart Opener.