Includes:

• Genuine Vicway FR60 Remote
• Battery
• Programming Instructions
• Free Shipping Australia-Wide*
• 2 Years Manufacturers Warranty*

Compatible with:

Remotes:

• Vicway FR46 (white button version)
• Vicway FR32
• Vicway FR42

Motors:

• V-380G (white button remote version)
• V-380LM
• V-390G (white button remote version)

Note:  This remote is not compatible with any motors that were installed prior to 2015 or if you had remote with blue buttons.

Programming to  V-380G and V-390G

• On the motor, press the “S” button, “0” will display on LCD and disappear immediately.
• Press the button on the NEW remote you wish to activate the door for 2 seconds, release then press again for 2 seconds.

Clear Memory V-380G and V-390G

• On the motor, Press and Hold the “S” button for 8 seconds, “0” will display on LCD.
• Keep pressing a working remote until the “0” disappears

Programming to V-380LM

• On the motor, Press and hold the “CODE” button until the small led dot on the LCD screen illuminates.
• Press button on the NEW remote you wish to activate the door for 2 seconds, release then press again for 2 seconds.

LED dot will flash fast for 8 times then return to standby mode.

Clear memory V-380LM

This receiver has the memory for 20 transmitters.  If the LED display flashes “F” and returns to standby mode after pressing CODE, your memory is full.

• On the motor, Press and hold the CODE button for more than 8 seconds until the LED flashes “C”