The ATA GDO 10v3 Toro Opener for Large Rolling Garage Doors includes:
- GDO 10v3 Toro Motor with Battery Backup (60233)
- Communication Cable (61909)
- Wall Mounted LCD Control Panel (61565)
- 2 x PTX5v2 Remotes (61161)
- Installation Accessory Pack (61480)
- Installation Instructions
- Free Standard Shipping Australia-Wide*
- 2 Years Manufacturers Warranty*
- TrioCode™ 128 Technology
- M-ALPS (Magnetic Automatic Limits Positioning System)
- ISS (Intelligent Safety Obstruction System)
- Auto Courtesy Light
- SmartSolar™ Compatibility (Optional)
- Vacation Mode
- Pet/Pedestrian Mode
- Auto-Close Mode
- Safety Beams (S.B) (Saftey beams are additional extras
- Safety Beam Failure Emergency Close (SBFEC)
- Manual Operation
- Service Indicator
The Toro® offers sophisticated commercial roller door opening technology and superior pulling power. With built-in Battery Back Up and a wall-mounted control panel you can program a variety of operating modes for your security and safety. Toro is the Giant in Large Rolling Garage Door Automation
TrioCode™ 128 Technology
Only transmitters with the TrioCode™ 128 Technology can operate with the latest Openers, reducing the chance of intereference from other radio frequency
sources. Every time a TrioCode™ 128 transmitter is used a new security code is randomly generated from over 100 billion possibilities. This greatly enhances the
security of the system and makes “code grabbing” a thing of the past. TrioCode™ 128 transmitters have the ability to code into earlier model openers.
M-ALPS (Magnetic Automatic Limits Positioning System)
M-ALPS does away with manual adjustment of the door’s limits position using mechanical parts, such as cams and microswitches. During installation the hand held transmitter can be programmed to set the door limit positions.
ISS (Intelligent Safety Obstruction System)
While the door is performing a close cycle, should it hit an obstacle or be restricted in some manner, it will automatically reverse. The amount of force the door should encounter before reversing is automatically adjusted by the doors control system during the initial installation of the automatic door opener. The door will also stop if restricted whilst opening. The Safety Obstruction Force should be checked monthly.
Auto Courtesy Light
The courtesy light (if fitted) comes on automatically for one minute whenever the door is activated. The light can also be operated independently of the door by coding a dedicated button on a transmitter
SmartSolar™ Compatibility (Optional)
The opener can be fitted with a SmartSolar™ kit (Part Number 60142) for operation where mains power access is not available.
NOTE: If the door is the only entrance to the garage, a keyed cable release should be fitted external to the garage.
A hand held transmitter can be programmed to lock and unlock all other transmitters that have been programmed into the openers’ memory. The Vacation Mode can be used when the door is left idle for long periods of time.
The transmitter can be programmed to open the door to an adjustable partial height so that the family pet can enter and exit the garage at any time. You may
also wish to open the door to a height suitable only for pedestrian access.
The opener can be programmed to automatically close after an open cycle. The Auto-Close time is adjustable. It is compulsory to install a Safety Beam if this mode is selected, otherwise the door may cause personal injury or damage to property
Safety Beams (S.B)
The opener has three inputs to connect one, two or three Safety Beams for extra safety and use of the Auto-Close mode.
Safety Beam Failure Emergency Close (SBFEC)
When a safety beam prevents movement due to any reason other than a ‘real’ obstruction, the user can secure their property by pressing and holding a button on the remote control or OSC on the console.
The opener is equipped with a unique patented manual disengaging device. If the power to the opener is disrupted for any reason, the door can be put into manual mode by pulling down on the string handle, then releasing. This will allow you to manually open or close the door. When power is restored, by pulling down on
the string handle and releasing, the opener is put back into automatic mode.
The opener has a built in service counter. When this counter expires the opener will beep and display “SERVICE DUE” to indicate a service is required.